Burp: Difference between revisions
From DcSharedWiki
(Update throughput using scp command. Add iperf measure. Add network controllers, modules.) |
(result added (1.5Go added)) |
||
| Line 37: | Line 37: | ||
Copying 212Go from client to backup server took 8h 1m 48s (7.50Mo/s). `iperf` measures 890 Mbits/s between server and client. |
Copying 212Go from client to backup server took 8h 1m 48s (7.50Mo/s). `iperf` measures 890 Mbits/s between server and client. |
||
== Test using client1 == |
|||
{| border="1" cellpadding="2" cellspacing="0" |
|||
| Description |
|||
| Compression |
|||
| SSL compression |
|||
| Duration on client (phase 1/phase 2) |
|||
| Throughput (phase 2) |
|||
|- |
|||
| backup: 1.5Go added |
|||
| None (`compression=gzip0`) |
|||
| (`ssl_compression=zlib0`) |
|||
| 11m 30s <span style="font-size: smaller">(4m 36s/6m 54s)</span> |
|||
|align="right" | 3.7Mo/s |
|||
|} |
|||
=== Old tests (there was a network configuration problem: `r8169` module was used instead of `r8168` on the client) === |
=== Old tests (there was a network configuration problem: `r8169` module was used instead of `r8168` on the client) === |
||
Revision as of 11:58, 8 July 2014
Burp tests
Description
Version: 1.3.48 (debian package 1.3.48-4~bpo70+1)
Hardware configuration:
| Type | CPU | Disk | RAM |
| Server | Marvell Armada 370 (ReadyNAS 104) | 2*WDC WD20EFRX-68EUZN0 (soft raid1 using mdadm) | 512Mo |
| Client1 | VIA Nano L2007 1600MHz | 2*WDC WD20EFRX-68EUZN0 (soft raid1 using mdadm) | 4Go |
| Client2 | VIA Nano L2007 1600MHz | 2*WDC WD20EFRX-68EUZN0 (soft raid1 using mdadm) | 4Go |
All hosts have gigabit NICs with properly cabled CAT 6 cables and all are connected to a Gigabit switch (Netgear GS108E).
Ethernet controllers and modules:
- client: `Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)` (controller), `r8168` (module)
- server: `Marvell 88E1318 Gigabit Ethernet PHY` (controller), `pegasus` (module)
Copying 212Go from client to backup server took 8h 1m 48s (7.50Mo/s). `iperf` measures 890 Mbits/s between server and client.
Test using client1
| Description | Compression | SSL compression | Duration on client (phase 1/phase 2) | Throughput (phase 2) |
| backup: 1.5Go added | None (`compression=gzip0`) | (`ssl_compression=zlib0`) | 11m 30s (4m 36s/6m 54s) | 3.7Mo/s |
Old tests (there was a network configuration problem: `r8169` module was used instead of `r8168` on the client)
Test using client1
| Description | Compression | SSL compression | Duration on client (phase 1/phase 2) | Throughput (phase 2) |
| First backup: 210Go | None (`compression=gzip0`) | (default parameter `ssl_compression` not set) | 37h 09m 30s (18m 56s/36h 50m 34s) | 1.6 Mo/s |
| Second backup: 34.33Mo added | None (`compression=gzip0`) | (default parameter `ssl_compression` not set) | 00h 18m 10s (16m 45s/1m 25s) | 0.4 Mo/s |
| Third backup: 4.14Go (mp4 files) added | None (`compression=gzip0`) | (default parameter `ssl_compression` not set) | 01h 19m 54s (11m 56s/1h 07m 58s) | 1.03 Mo/s |
| Fourth backup: 4.24Go (mp4 files) added | None (`compression=gzip0`) | `ssl_compression=gzip0` | 00h 58m 16s (16m 39s/41m 37s) | 1.73 Mo/s |
Test using client2
| Description | Compression | SSL compression | Duration on client (phase 1/phase 2) | Throughput (phase 2) |
| First backup: | None (`compression=gzip0`) | (default parameter `ssl_compression` not set) | 37h 06m 53s (15m 40s/36h 51m 13s) |
