Burp

From DcSharedWiki
Revision as of 13:18, 11 July 2014 by Pilou (talk | contribs) (Add new test (full backup))

Burp tests

Description

Version: 1.3.48 (debian package 1.3.48-4~bpo70+1)

Hardware configuration:

Type CPU Disk RAM
Server Marvell Armada 370 (ReadyNAS 104) 2*WDC WD20EFRX-68EUZN0 (soft raid1 using mdadm) 512Mo
Client1 VIA Nano L2007 1600MHz 2*WDC WD20EFRX-68EUZN0 (soft raid1 using mdadm) 4Go
Client2 VIA Nano L2007 1600MHz 2*WDC WD20EFRX-68EUZN0 (soft raid1 using mdadm) 4Go

All hosts have gigabit NICs with properly cabled CAT 6 cables and all are connected to a Gigabit switch (Netgear GS108E).

Ethernet controllers and modules:

  • client: `Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)` (controller), `r8168` (module)
  • server: `Marvell 88E1318 Gigabit Ethernet PHY` (controller), `pegasus` (module)

Copying 212Go from client to backup server took 8h 1m 48s (7.50Mo/s). `iperf` measures 890 Mbits/s between server and client.

Test using client1

Description Compression (`compression`) <<FootNote(Note: Extensions which are not compressed: bz, bz2, zip, gz, webm, mov, png, jpg, jpeg, rar, m4v, avi, xv, jar, tgz, mp4, mkv, ogg, flv)>> SSL compression (`ssl_compression`) Duration on client phase 1 phase 2 Data send Throughput (phase 2) Duration on server phase 3
incremental backup: 1.5Go added None (`compression=gzip0`) None (`ssl_compression=zlib0`) 11m 30s 04m 36s 06m 54s 1.5Go 3.7Mo/s 16m 28s 01m 01s
full backup: 209.17 Go gzip9 (default value) zlib5 (default value) 34h 17m 34s 07m 18s 34h 10m 18s 167.4Go 1.4Mo/s 06m 22s 02m 22s

Old tests

There was a network configuration problem: `r8169` module was used instead of `r8168` on the client.

Test using client1

Description Compression SSL compression Duration on client (phase 1/phase 2) Throughput (phase 2)
First backup: 210Go None (`compression=gzip0`) (default parameter `ssl_compression` not set) 37h 09m 30s (18m 56s/36h 50m 34s) 1.6 Mo/s
Second backup: 34.33Mo added None (`compression=gzip0`) (default parameter `ssl_compression` not set) 00h 18m 10s (16m 45s/1m 25s) 0.4 Mo/s
Third backup: 4.14Go (mp4 files) added None (`compression=gzip0`) (default parameter `ssl_compression` not set) 01h 19m 54s (11m 56s/1h 07m 58s) 1.03 Mo/s
Fourth backup: 4.24Go (mp4 files) added None (`compression=gzip0`) `ssl_compression=gzip0` 00h 58m 16s (16m 39s/41m 37s) 1.73 Mo/s

Test using client2

Description Compression SSL compression Duration on client (phase 1/phase 2) Throughput (phase 2)
First backup: None (`compression=gzip0`) (default parameter `ssl_compression` not set) 37h 06m 53s (15m 40s/36h 51m 13s)